Speedway Motors 3/16" Thick Steel Racing Offroad Beadlock Kit for 15" Inch Wheel

Description

This beadlock kit welds to a 15" steel wheel, One piece steel inner ring with attached threaded inserts allows the outer ring to be bolted on without using a wrench to hold nuts on the back side, Inner ring is 3/16" thick for added strength, Outer ring is powder coated black for a durable long lasting finish, Instructions are included to simplify installation
Speedway Beadlock Kit for 15 Inch Racing Wheel
Sku # 2531510
Mfr. Part # 2531510
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
This bead lock kit welds to 15" steel wheel. One piece steel ring with attached threaded inserts. Complete with mounting hardware and 3/16" thick weld-on steel ring. All threaded nuts come pre-attached. Winners use these on both the inside and the outside!
Item Details
Bolts, inner & outer steel rings included
Charts
(PDF)
(GIF)
Installation Tips
Weld-on ring is 15-3/8” diameter and is 2-3/4" side-to-side from center-to-center on the bolts. Diameter of ring is 14" center-to-center on bolt holes.
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Powder Coated
Notes
Includes 5/16"-18 x 1" bolts.
Flange Width
1.250
Flange Diameter
15.5
Flange Thickness
0.1875
MFG. Part #
2531510
Reviews
I would buy this product again.
Rated
by Leighanne on September 17, 2019
Summary:
Cheaper than buying a beadlock rim and works the same.
Yes, I recommend this product.
They're ok, could be better.
Rated
by ThatOneGuy on March 03, 2019
Summary:
They are good and bad.. lol Them being thinner is nice because they are lightweight but on the other hand they are weaker. The outer rings bend just putting the bolts in, they are holding the thick bead of Boggers and TSL's so maybe better with others. Have had a few nutserts come loose, would highly advise tack welding them before installing. Have had them for 3 years so far and only replaced one outer ring. I wheel mostly in woods, ravines, and mud no real rocks.
Cons:
Could be thicker
Pros:
Don't hold a lot of mud
Lightweight
Yes, I recommend this product.
Good product for the price
Rated
by AndRoo on June 13, 2018
Summary:
Good quality and east to fit. Less bolts than the more expensive ones but that may not make a difference.
Yes, I recommend this product.
Review for bead lock kit.
Rated
by Ron on April 29, 2017
Summary:
Works great for our car!
Pros:
Easy To Set Up
Easy To Store
Increases Efficiency
Low Power Requirements
Rugged Construction
Versatile
Yes, I recommend this product.
Works for what I needed
Rated
by Veltri77 on February 22, 2017
Summary:
I'm not using them for what they were intended. I'm using them for low pressure snow wheeling. 1 to 5 psi. They have a rolled head on the lock ring. The only type like this I have found. Cons- thin lockring, only 16 bolts. I drill them out to 32. The rolled ring does not cut the bead of the tire. Maybe some day they will make them 32 and thicker!
Cons:
Limited Use
Poor Quality
Pros:
Easy To Set Up
Yes, I recommend this product.
Related Items / Suggested Parts
15 Inch Wheel Replacement Outer Beadlock Ring For 253-1510 Kit
15 Inch Weld-On Beadlock Ring, Inner Ring Only
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.